Push-to-Connect Elbow Fitting
Push-to-Connect Elbow Fitting: 90° stainless push-in fitting for crowded bases. FerruleX factory RFQ. Stocked sizes ship fast. Export RFQ only — no cart.
- Brand
- FerruleX
- Material
- SS304 / SS316
- Type
- Push-to-connect elbow
- Pattern
- 90°
- Order mode
- Factory RFQ
- Stock5–7 days after confirmation
- Make to order15–25 days production
- Payment / termsT/T ~30% or L/C · FOB Shanghai / Ningbo
- OEMLogo and drawings accepted · price on RFQ
Description
Push-to-connect elbow fittings turn soft tube 90° in stainless without a sharp manual bend. FerruleX SS304/SS316 elbows serve crowded machine bases and control boxes in the push-in OD series on RFQ. No flaring tools are required — square-cut tube and push to depth. Air and light water service are typical after media confirmation. Order OD and quantity from FerruleX for stocked elbows with factory RFQ pricing. Keep a short straight segment into the elbow so the grab ring reaches full depth. Brand FerruleX; Material SS304 / SS316; Type Push-to-connect elbow; Pattern 90°; Order mode Factory RFQ.
Elbows reduce kink failures beside motors where tube must exit a tight corner. Leave a short straight segment into the elbow so the grab ring seats fully. FerruleX bags left/right if your BOM distinguishes orientation for molded tubes. Left and right orientations can be bagged separately when molded tube exits dictate a handed elbow.
- Geometry
- 90° push-in elbow.
- Install
- No flaring tools required.
- Materials
- SS304 / SS316.
Specifications
| Specification | Value |
|---|---|
| Brand | FerruleX |
| Material | SS304 / SS316 |
| Type | Push-to-connect elbow |
| Pattern | 90° |
| Order mode | Factory RFQ |
Request Quote
Prices stay on the RFQ. Send size, material, quantity and destination — the factory replies with price, lead time and packing.
Shipping & packing
Parts ship in a bag, inner carton and export carton. Large lots can go in a wooden case with a packing list and invoice. Default term is FOB Shanghai or Ningbo. Full notes are on thedelivery page.
Questions buyers ask
What should I send for a quote?
Size, material (SS304, SS316 or SS316L), quantity, end connection and destination. Add a sketch if the two ends are different.
How fast can this ship?
Stocked sizes usually leave 5–7 days after you confirm the quote. Make-to-order runs are about 15–25 days in production, then transit. Name the port if you want CIF.
Can I order a small trial or put my logo on it?
Yes. Trial quantities are quoted, and OEM marking or drawings are accepted. Payment is normally T/T with about 30% deposit, balance before shipment, or L/C at sight.
Related products
Push-to-Connect Straight Fitting
Push-to-Connect Straight Fitting: stainless push-in tube fitting for air/water. SS304/316. FerruleX RFQ. Stocked sizes ship fast. Export RFQ only — no cart.
View details →
Push-to-Connect Straight Union
Push-to-Connect Straight Union: stainless push-in tube-to-tube union. SS304/316. FerruleX RFQ. Stocked sizes ship fast. Export RFQ only — no cart.
View details →
Push-to-Connect Bulkhead Fitting
Push-to-Connect Bulkhead Fitting: panel-pass stainless push-in fitting. SS304/316. FerruleX factory RFQ. Stocked sizes ship fast. Export RFQ only — no cart.
View details →
Push-to-Connect Throttle Valve
Push-to-Connect Throttle Valve: stainless flow control for air lines, OD 3–25 mm, about 3000 PSI. SS304/316. FerruleX RFQ. Stocked sizes ship fast.
View details →